Can I read Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread on EtoBox?

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread by ISO/TC 2/SC 11 Fasteners with metric external thread is a reference work available to read on EtoBox.

What is Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread about?

ISO 898-1:2013 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when bolts, screws and studs are considered all together) that conform to the requirements of ISO 898-1:2013 are evaluated at that ambient temperature range. They might not retain the specified mechanical and physical properties at elevated temperatures (see Annex B) and/or lower temperatures. Certain bolts and screws might not fulfil the tensile or torsional requirements of ISO 898-1:2013 because the geometry of their heads reduces the shear area in the head compared to the stress area in the thread. These include bolts and screws having a low or countersunk head. ISO 898-1:2013 is applicable to bolts, screws and studs. made of carbon steel or alloy steel,. having triangular ISO metric screw thread in accordance with ISO 68-1,. with coarse pitch thread M1,6 to M39, and fine pitch thread M8×1 to M39×3,. with diameter/pitch combinations in accordance with ISO 261 and ISO 262, and. having thread tolerances in accordance with ISO 965-1, ISO 965-2 and ISO 965-4. It is not appli

Who reads Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread?

Author

ISO/TC 2/SC 11 Fasteners with metric external thread

Publisher

ISO

Published

2012

Language

EN

Category

reference