Opening book details…
Can I read Adhesives - Measurement of adhesion characteristics by a three-point bending method on EtoBox?
Adhesives - Measurement of adhesion characteristics by a three-point bending method by ISO/TC 61/SC 11 Products is a reference work available to read on EtoBox.
What is Adhesives - Measurement of adhesion characteristics by a three-point bending method about?
This International Standard specifies a test method to determine the ability of a cured adhesive (if necessary with a primer) to adhere to a substrate with a certain surface finish, or which has been subjected to a specific surface preparation, using the "three-point bending method". This standard is only applicable to quality assurance and only to substrates which are rigid or resistant enough to bending, such as steel or aluminium alloys. For other substrates, the thickness is adjusted to the modulus of elasticity or a suitable stiffener is used. The adhesive is allowed to cure without the application of pressure in order to obtain the thickness needed to provide sufficient rigidity, otherwise a bonded reinforcing piece of the same material and the same thickness as the substrate is substituted for the block of adhesive. This test method is not suitable for film adhesives.
Who reads Adhesives - Measurement of adhesion characteristics by a three-point bending method?
It is typically read by working professionals who need an authoritative practice reference.
Common subject areas: medicine, law, business, engineering.
- Author
- ISO/TC 61/SC 11 Products
- Publisher
- ISO
- Published
- 1997
- Language
- EN
- Category
- reference
More by ISO/TC 61/SC 11 Products
Browse all works by ISO/TC 61/SC 11 Products
Similar books
- Adhesives - Determination of Strength of Bonded Joints Using a Bending-shear Method — ISO/TC 61/SC 11 Products (1998)
- Self Adhesive Tapes -- Measurement of Static Shear Adhesion — ISO/TC 61/SC 11 Products (2018)
- Adhesives. Wettability. Determination by Measurement of Contact Angle and Surface Free Energy of Solid Surface — British Standards Institute Staff (2013)
- Adhesives. Determination of Peel Resistance of Adhesive Bonds. Floating Roller Method — 标准分享网 (2010)
- Rubber, Vulcanized or Thermoplastic -- Determination of Adhesion to a Rigid Substrate -- 90 Degree Peel Method — ISO/TC 45/SC 2 Testing and analysis (2016)
- Paper and Board -- Determination of Bending Stiffness -- General Principles for Two-point, Three-point and Four-point Methods — ISO/TC 6/SC 2 Test methods and quality specifications for paper and board (2011)