Can I read Biaxial Residual Stress States of Plasma-sprayed Hydroxyapatite Coatings on Titanium Alloy Substrate on EtoBox?

Biaxial Residual Stress States of Plasma-sprayed Hydroxyapatite Coatings on Titanium Alloy Substrate by Y.C Yang; Edward Chang; B.H Hwang; S.Y Lee is a Engineering article available to read on EtoBox.

What is Biaxial Residual Stress States of Plasma-sprayed Hydroxyapatite Coatings on Titanium Alloy Substrate about?

Biaxial residual stress states of plasma-sprayed hydroxyapatite coatings (HACs) on titanium alloy substrate as a function of plasma power, powder feed rate and coating thickness were studied by X-ray 'sin2 psi' method. The Young's modulus of hydroxyapatite (HA), required for the stress analysis, was measured from the separated free coating by three-point bending test method. It was found that the directions of principal stresses were in proximity to and perpendicular to the spraying direction. The measured Young's moduli of HACs were much lower than the theoretical value reported. The denser, well-melted HAC exhibited a higher residual stress, as compared with the less dense, poor-melting HAC. The denser coatings could be effected by higher plasma power and lower powder feed rate. Significantly, the thicker 200 microm HAC exhibited higher residual stress than that of the thinner 50 microm HAC. The implications of residual stress in HAC for biomaterials are discussed in detail.

Who reads Biaxial Residual Stress States of Plasma-sprayed Hydroxyapatite Coatings on Titanium Alloy Substrate?

Author

Y.C Yang; Edward Chang; B.H Hwang; S.Y Lee

Publisher

Elsevier Science; Elsevier ; Elsevier Ltd.; Elsevier BV (ISSN 0142-9612)

Published

2000

Language

EN

Field

Engineering (Physical Sciences)