Skip to content

Opening book details…

Can I read Measurements and predictions of densities and viscosities in CO2 + hydrocarbon mixtures at high pressures and temperatures: CO2 + n-pentane and CO2 + n-hexane blends on EtoBox?

Measurements and predictions of densities and viscosities in CO2 + hydrocarbon mixtures at high pressures and temperatures: CO2 + n-pentane and CO2 + n-hexane blends by Alejandro Moreau; Ilya Polishuk; José J. Segovia; Dirk Tuma; David Vega-Maza; M. Carmen Martín is a Chemical Engineering article available to read on EtoBox.

What is Measurements and predictions of densities and viscosities in CO2 + hydrocarbon mixtures at high pressures and temperatures: CO2 + n-pentane and CO2 + n-hexane blends about?

This work reports new experimental data on densities and viscosities of (CO 2 + n-pentane) and (CO 2 + nhexane) mixtures at high pressures and temperatures. The densities were measured by a vibrating-tube densimeter with an expanded uncertainty (k = 2) smaller than 1.8 kgÁm À3 at six isotherms (from 273.15 K to 373.15 K), twelve pressures starting at 5 MPa up to 100 MPa, and at six CO 2 molar compositions (from 0 to 0.6). The viscosities were measured by a vibrating-wire viscometer with the corresponding relative expanded uncertainty (k = 2) smaller than 0.016 at five isotherms (from 273.15 K to 373.15 K), twelve pressures (from 5 MPa up to 100 MPa), and at two CO 2 molar compositions (0.1 and 0.3). The densities were fitted by the semiempirical Tammann-Tait equation for density data and the Vogel-Fulcher-Tammann (VFT) equation for viscosity data, respectively. The Groupe Européen de Recherches Gazières (GERG-2008) equation of state was also applied for modelling the densities. Over-all robustness and reliability of the Perturbed-Chain Statistical Association Fluid Theory (PC-SAFT) and its critical point-based modification (CP-PC-SAFT) were examined. Accuracies of the Modified Yarr

Who reads Measurements and predictions of densities and viscosities in CO2 + hydrocarbon mixtures at high pressures and temperatures: CO2 + n-pentane and CO2 + n-hexane blends?

It is typically read by researchers, students, and practitioners in Chemical Engineering.

Author
Alejandro Moreau; Ilya Polishuk; José J. Segovia; Dirk Tuma; David Vega-Maza; M. Carmen Martín
Publisher
Elsevier BV
Published
2022
Language
EN
Field
Chemical Engineering (Physical Sciences)

More by Alejandro Moreau; Ilya Polishuk; José J. Segovia; Dirk Tuma; David Vega-Maza; M. Carmen Martín

Browse all works by Alejandro Moreau; Ilya Polishuk; José J. Segovia; Dirk Tuma; David Vega-Maza; M. Carmen Martín