Skip to content

Opening book details…

Can I read Effect of sodium on the creep resistance of yttrium aluminium garnet (YAG) fibres on EtoBox?

Effect of sodium on the creep resistance of yttrium aluminium garnet (YAG) fibres by R.C. Pullar; M.D. Taylor; A.K. Bhattacharya is a Materials Science article available to read on EtoBox.

What is Effect of sodium on the creep resistance of yttrium aluminium garnet (YAG) fibres about?

Aligned YAG fine fibres had been made previously from an aqueous sol-gel process, but it was suspected that sodium contamination in one of the starting materials lessened the creep resistance of the final product. Therefore, sodium-free gel precursor fibres were made using the same process, and upon firing in air at 900 • C these formed pure phase YAG fibres, of 4 m diameter. When steamed over 200-500 • C for 3 h, the amorphous gel fibre formed single phase nanocrystalline YAG between 400 and 500 • C, an extraordinarily low temperature for this material to crystallise. Upon postfiring up to 1550 • C, grains averaging 0.5 m and pores of 0.17 m had formed, but despite this porosity and smaller grain size, the sodium-free fibre exhibited superior creep resistance than the sodium contaminated fibres reported previously by the authors, typically creeping at temperatures 50 • C higher. This demonstrates that even small levels of sodium contamination are harmful to creep resistance in YAG.

Who reads Effect of sodium on the creep resistance of yttrium aluminium garnet (YAG) fibres?

It is typically read by researchers, students, and practitioners in Materials Science.

Author
R.C. Pullar; M.D. Taylor; A.K. Bhattacharya
Publisher
Elsevier Science; Elsevier ; Elsevier BV (ISSN 0955-2219)
Published
2006
Language
EN
Field
Materials Science (Physical Sciences)

More by R.C. Pullar; M.D. Taylor; A.K. Bhattacharya

Browse all works by R.C. Pullar; M.D. Taylor; A.K. Bhattacharya