About this document
Running-in Guidelines for Wärtsilä Engines by zbkt07 is a document available to read on EtoBox.
This document provides guidelines for running-in newly fitted piston rings after an engine overhaul or cylinder liner replacement. It recommends gradually increasing the cylinder lubricating oil feed rate during running-in from an initial maximum of 1.6 g/kWh down to the guide rate of 1.1 g/kWh over time based on the running-in program. The feed rate should be reduced slowly by no more than 0.1 g/kWh per adjustment to avoid seizing. It also provides details on calculating and adjusting the feed rate for dif
- Author
- zbkt07
- Language
- EN