About this document

Microcontroller Control of AC Switch by wondi BET is a document available to read on EtoBox.

Here is the code to interface the temperature sensor and control the LED based on the temperature reading: #include <pic.h> void main() { TRISAbits.TRISA0 = 1; // Configure RA0 pin as input for sensor while(1){ temp = read_temp(); // Read temperature from sensor if(temp > 30){ // Check if temperature is greater than 30 degree PORTBbits.RB0 = 1; // Turn ON LED } else{ PORTBbits.RB0 = 0; // Turn OFF LED } } } float read_temp(){ // Code to read temperature fro

Author

wondi BET

Language

EN