About this document
WQT Acceptance Criteria and Qualifications by mrbart_88 is a document available to read on EtoBox.
- The welder is qualified for pipe groove welds in the 2G position from 6mm up to unlimited thickness and for any pipe size. - For welder qualification, an alternate base metal can be used and the welder is then qualified to weld all combinations of base metals shown in the qualification table, including metals of similar composition. - For mechanical testing acceptance criteria, the weld and heat-affected zone must be within the bent portion of the specimen after testing with no discontinuities exceeding
- Author
- mrbart_88
- Language
- EN