About this document
Form 3 Design Guidelines for 3D Printing by Rigoberto GONZALEZ SUAREZ is a document available to read on EtoBox.
The Form 3 Design Guide provides minimum feature size recommendations for 3D printed models, including: - Supported wall thickness of 0.2mm or more - Unsupported wall thickness of 0.2mm or more - Maximum unsupported overhang length of 5mm - Minimum unsupported overhang angle of 10 degrees - Minimum hole diameter, embossed detail, and engraved detail of 0.5mm or more
- Author
- Rigoberto GONZALEZ SUAREZ
- Language
- EN