Can I read Catalogue record on EtoBox?

Catalogue record by Kathy Bratchie is a reference work available to read on EtoBox.

What is Catalogue record about?

1. SCOPE 1 1.1 Form 1 1.2 Application 1 2. APPLICABLE DOCUMENTS 1 2.1 SAE Publications 1 2.2 ASTM Publications 2 3. TECHNICAL REQUIREMENTS 2 3.1 Composition 2 Table 1 - Composition 2 3.1.1 Check Analysis 2 3.2 Condition 3 3.2.1 Sheet and Strip 3 3.2.1.1 Sheet 3 3.2.1.2 Strip 3 3.2.2 Plate 3 3.3 Heat Treatment 3 3.3.1 Continuous Heat Treating 3 3.4 Properties 3 3.4.1 Tensile Properties 3 Table 2 - Minimum tensile properties 3 3.4.2 Bending 4 Table 3 - Bending parameters 4 3.4.3 Stress-Rupture Properties at 1500 F 4 Table 4 - Stress rupture parameters 4 3.4.3.1 The test of 3.4.3 may be conducted using a load higher than required to produce an initial axial stress of 16.0 ksi but load shall not be changed while test is in progress. Time to rupture and elongation requirements shall be as specified in T... 4 3.4.3.2 The test of 3.4.3 may be conducted using incremental loading. In such case, the load required to produce an initial axial stress of 16.0 ksi shall be used to rupture or for 24 hours, whichever occurs first. After the 24 hours and at intervals ... 4 3.4.3.2.1 The test of 3.4.3.2 applies only to product 0.020 inch and over in nominal thickness. 4 3.4.4 Average Grain Size 4 3.

Who reads Catalogue record?

Author

Kathy Bratchie

Language

RU

Category

reference