About this document
Booster Pump Design Calculations by Sharon Lambert is a document available to read on EtoBox.
This document outlines the calculations and specifications for a booster pump system. It specifies that the required pressure is 25 PSI and there is one pump (P-1) operating at 100% capacity of 120 GPM. The static head is 26 PSI and piping friction loss is estimated at 3 PSI. The booster pump must provide 46 PSI of boost to achieve the total required system pressure of 54 PSI, accounting for suction and internal pressures. Pump BP-1 is selected to meet the system capacity of 120 GPM at a total dynamic head
- Author
- Sharon Lambert
- Language
- EN