Can I read Installing Panwater Fan Assembly on EtoBox?

Installing Panwater Fan Assembly by Angelamiyabi Andini is a document available to read on EtoBox.

What is Installing Panwater Fan Assembly about?

1. Install the fan hub on the gear reducer output shaft and check that it is level and the blades will be positioned at 90 degree angles to each other, shimming as needed. 2. Mark each fan blade clamp to match the blade position on the hub. Install the blades loosely in the clamps while ensuring the blade flange is flush with the back of the clamp. 3. Tighten the bolts on each clamp after setting the blade pitch to securely hold the blade in place. Check the blade pitch and tracking, adjusting as necess

Author

Angelamiyabi Andini

Language

EN