Can I read In Situ Characterization of Internal Damage in TRIP-Steel/Mg-PSZ Composites under Compressive Stress Using X-Ray Computed Tomography on EtoBox?

In Situ Characterization of Internal Damage in TRIP-Steel/Mg-PSZ Composites under Compressive Stress Using X-Ray Computed Tomography by Harry Berek; Uta Ballaschk; Christos G. Aneziris is a scholarly article available to read on EtoBox.

What is In Situ Characterization of Internal Damage in TRIP-Steel/Mg-PSZ Composites under Compressive Stress Using X-Ray Computed Tomography about?

## Abstract An experimental setup for in situ investigations under compressive stress using laboratory X‐ray computed tomography (XCT) was developed and successfully tested. Complete deformation curves can be taken. It could be shown that XCT scans are possible during brakes of the stopped in situ experiments. In this way the deformation behavior of defined sample regions can be investigated. This kind of experiments is well suited to investigate the deformation behavior of foams and other samples which are transferable for the X‐rays used. The compression of metal matrix composite foams lead to the cooperative collapse of connected cells. We observed deformation bands arising in regions of smaller cell wall thicknesses. The deformation was dependent on size, shape, and orientation of the cells under consideration. Obviously deformation bands start at bigger cells with a small cell wall thickness and some extension perpendicular to the deformation direction. The rising of this kind of deformation bands can be explained by the dramatic change of the stress distribution in the neighbor cells after the first brake of a cell wall.

Author

Harry Berek; Uta Ballaschk; Christos G. Aneziris

Publisher

John Wiley and Sons; Wiley (John Wiley & Sons); John Wiley & Sons Ltd.; Wiley (ISSN 1438-1656)

Published

2011

Language

EN