Opening book details…
Can I read Determination of flash point -- Pensky-Martens closed cup method on EtoBox?
Determination of flash point -- Pensky-Martens closed cup method by ISO/TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources is a reference work available to read on EtoBox.
What is Determination of flash point -- Pensky-Martens closed cup method about?
ISO 2719:2016 describes three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C. CAUTION - For certain mixtures no flash point, as defined, is observed; instead a significant enlargement of the test flame (not halo effect) and a change in colour of the test flame from blue to yellowish-orange can occur. Continued heating can result in significant burning of vapours outside the test cup, and can be a potential fire hazard. NOTE 1 Although, technically, kerosene with a flash point above 40 °C can be tested using this International Standard, it is standard practice to test kerosene according to ISO 13736.[5] Similarly, lubricating oils are normally tested according to ISO 2592[2]. Procedure A is applicable to distillate fuels (diesel, biodiesel blends, heating oil and turbine fuels), new and in-use lubricating oils, paints and varnishes, and other homogeneous liquids not included in the scope of Procedures B or C. Procedure B is applicable to r
Who reads Determination of flash point -- Pensky-Martens closed cup method?
It is typically read by working professionals who need an authoritative practice reference.
Common subject areas: medicine, law, business, engineering.
- Author
- ISO/TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources
- Publisher
- ISO
- Published
- 2016
- Language
- EN
- Category
- reference
More by ISO/TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources
Similar books
- Determination of Crystallizing Point — General Method — ISO/TC 47 Chemistry (1977)
- Fruit Juice - Determination of Soluble Solids Content - Pycnometric Method — ISO/TC 34/SC 3 Fruits and vegetables and their derived products (1983)
- Methods of Test for Paints. Part A9. Determination of Flashpoint (closed Cup Equilibrium Method). BS 6664 :flashpoint of Petroleum and Related Products. Part 2. Method for Determination of Flashpoint (closed Cup Equilibrium Method) — British Standards Institute Staff; British Standards Institution (1999)
- Determination of Flash and Fire Points - Cleveland Open Cup Method — ISO/TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources (2000)
- Hygrothermal Performance of Building Materials and Products -- Determination of Water Vapour Transmission Properties -- Cup Method — ISO/TC 163/SC 1 Test and measurement methods (2016)
- Determination of Particle Size Distribution by Centrifugal Liquid Sedimentation Methods -- Part 2: Photocentrifuge Method — ISO/TC 24/SC 4 Particle characterization (2007)