Can I read Metallic materials -- Vickers hardness test -- Part 1: Test method on EtoBox?

Metallic materials -- Vickers hardness test -- Part 1: Test method by ISO is a reference work available to read on EtoBox.

What is Metallic materials -- Vickers hardness test -- Part 1: Test method about?

Foreword 0 1 Scope 0 2 Normative references 0 3 Terms and definitions 0 4 Principle 0 5 Symbols and designations 0 5.1 Symbols and designations used in this document 0 5.2 Designation of hardness number 0 6 Testing machine 0 6.1 Testing machine 0 6.2 Indenter 0 6.3 Diagonal measuring system 0 7 Test piece 0 7.1 Test surface 0 7.2 Preparation 0 7.3 Thickness 0 7.4 Tests on curved surfaces 0 7.5 Support of unstable test pieces 0 8 Procedure 0 8.1 Test temperature 0 8.2 Test force 0 8.3 Periodic verification 0 8.4 Test piece support and orientation 0 8.5 Focus on test surface 0 8.6 Test force application 0 8.7 Prevention of the effect of shock or vibration 0 8.8 Minimum distance between adjacent indentations 0 8.9 Measurement of the diagonal length 0 8.10 Calculation of hardness value 0 9 Uncertainty of the results 0 10 Test report 0 Annex A (normative) Minimum thickness of the test piece in relation to the test force and to the hardness 0 Annex B (normative) Tables of correction factors for use in tests made on curved surfaces 0 Annex C (normative) Procedure for periodic checking of the testing machine, diagonal measuring system and the indenter by the user 0 Annex D (informative)

Who reads Metallic materials -- Vickers hardness test -- Part 1: Test method?

Author

ISO

Language

EN

Category

reference