About this document

pH Meter HI 99104 Operation Guide by AndresLoaizaRuiz is a document available to read on EtoBox.

1) Connect the electrode to the meter and rinse with water if necessary. Soak in storage solution if dry. 2) Turn on the meter, calibrate using pH 7 and pH 4 or 10 buffers, then immerse in sample and wait for reading to stabilize. 3) After use, rinse electrode with water, clean with cleaning solution, and store in protective cap with storage solution. Replace batteries when display fades.

Author

AndresLoaizaRuiz

Language

EN