Opening book details…
Can I read Application of Debond Length Measurements to Examine the Mechanics of Fiber Pushout on EtoBox?
Application of Debond Length Measurements to Examine the Mechanics of Fiber Pushout by V.T. Bechel; N.R. Sottos is a Engineering article available to read on EtoBox.
What is Application of Debond Length Measurements to Examine the Mechanics of Fiber Pushout about?
The interface failure sequence was observed during \_ber pushout tests on several model composites[ Composites with varying \_ber!to!matrix moduli ratio "E f :E m #\ sample lengths\ interface bond strength\ and processing residual stresses were tested to determine which composites would debond from the top and which from the bottom[ The present pushout experiments combined with previous work in the literature indicate that only composites with an E f :E m ratio greater than four tend to debond from the bottom during pushout testing\ and debonding tends to initiate at the top of the interface when the E f :E m ratio is less than three[ The debond length as a function of force and displacement was also measured in a polariscope for two of the model composites\*steel:epoxy and polyester:epoxy[ The pushout data from a polyester:epoxy system that debonded from the top was \_t to a shear lag solution of the \_ber pushout problem to obtain the mode II toughness "G IIc # of the \_berÐmatrix interface[ The resulting interface toughness was then used to check the predicted debond length as a function of pushout force[ The debond length calculated from the shear lag model was less than the me
Who reads Application of Debond Length Measurements to Examine the Mechanics of Fiber Pushout?
It is typically read by researchers, students, and practitioners in Engineering.
- Author
- V.T. Bechel; N.R. Sottos
- Publisher
- Elsevier Science; Elsevier ; Elsevier Ltd.; Elsevier BV (ISSN 0022-5096)
- Published
- 1998
- Language
- EN
- Field
- Engineering (Physical Sciences)