Can I read Initial permeability studies of Ni–Zn ferrites prepared by flash combustion technique on EtoBox?

Initial permeability studies of Ni–Zn ferrites prepared by flash combustion technique by R.V. Mangalaraja; S. Ananthakumar; P. Manohar; F.D. Gnanam is a Engineering article available to read on EtoBox.

What is Initial permeability studies of Ni–Zn ferrites prepared by flash combustion technique about?

The initial permeability (m i ) and relative loss factor (tan d /m i ) of NiÁ/Zn ferrite of composition Ni 0.8 Zn 0.2 Fe 2 O 4 prepared by the non-conventional flash combustion technique are studied and reported. The ferrite powder prepared by this technique was calcined at 900 8C and the uniaxially pressed samples were sintered at various temperatures 1150, 1250 and 1350 8C. The initial permeability and the relative loss factor have been studied as the function of testing frequency and temperature. It is observed that the Ni Á/Zn ferrites prepared by this technique have the initial permeability from 16 to 20 in the frequency range 1 kHZ to 13 MHz and the relative loss factor of 10 3 Á/10 4 in the frequency range 100 kHZ to 13 MHz. The initial permeability increases from room temperature to 300 8C. The relative loss factor is of the order of 10 (2 . The results obtained are better when compared with ferrites prepared by the conventional ceramic method. This is attributed to better purity, controlled microstructure and chemical homogeneity achievable by the flash combustion method. Low relative loss factor makes these ferrites particularly useful as inductor and transformer material

Who reads Initial permeability studies of Ni–Zn ferrites prepared by flash combustion technique?

Author

R.V. Mangalaraja; S. Ananthakumar; P. Manohar; F.D. Gnanam

Publisher

Elsevier Science; Elsevier ; Elsevier BV (ISSN 0921-5093)

Published

2003

Language

EN

Field

Engineering (Physical Sciences)