Can I read Flexible Polymer Light Emitting Devices Using Polymer-reinforced Ultrathin Glass on EtoBox?

Flexible Polymer Light Emitting Devices Using Polymer-reinforced Ultrathin Glass by Kian Soo Ong; Jianqiao Hu; Roshan Shrestha; Furong Zhu; Soo Jin Chua is a Engineering article available to read on EtoBox.

What is Flexible Polymer Light Emitting Devices Using Polymer-reinforced Ultrathin Glass about?

High-quality low-temperature indium tin oxide (ITO) thin films were deposited on polymer-reinforced ultrathin glass for flexible polymer light emitting devices (PLEDs). For a 130-nm thick ITO film, a sheet resistance of 25 V/sq was obtained when it was prepared at a hydrogen partial pressure of 2.610 À3 Pa. The transmittance of ITO film was above 85% over the visible spectrum. A maximum electroluminescent (EL) efficiency of 5.1 cd/A for the flexible PLEDs at an operating voltage of 5 V was obtained. The bending properties of ultrathin glass with a reinforcement polymer layer were investigated. The minimum-bending radius of reinforced glass was calculated. The improvement in the flexibility of ultrathin glass sheet due to the polymer reinforcement was clearly demonstrated.

Who reads Flexible Polymer Light Emitting Devices Using Polymer-reinforced Ultrathin Glass?

Author

Kian Soo Ong; Jianqiao Hu; Roshan Shrestha; Furong Zhu; Soo Jin Chua

Publisher

Elsevier Science; Elsevier ; Elsevier Sequoia; Elsevier BV (ISSN 0040-6090)

Published

2005

Language

EN

Field

Engineering (Physical Sciences)