About this document

Melt Flow Effects on SLM Porosity in Ti-6Al-4V by amit raj is a document available to read on EtoBox.

This study investigates the impact of laser scanning speed and powder layer thickness on the surface structure and porosity of Ti–6Al–4V samples produced through selective laser melting (SLM). It was found that lower porosity levels are achieved at scanning speeds below 2700 mm/s with a fixed powder layer thickness of 20 µm, while thicker powder layers significantly increase porosity. The research combines experimental observations and computational fluid dynamics to correlate melt flow behavior with porosi

Author

amit raj

Language

EN