Opening book details…
Can I read Magnetic Abrasive Polishing for Internal Face of STS Tube using Sludge Abrasive Grain on EtoBox?
Magnetic Abrasive Polishing for Internal Face of STS Tube using Sludge Abrasive Grain by Kim H.N. is a nonfiction available to read on EtoBox.
What is Magnetic Abrasive Polishing for Internal Face of STS Tube using Sludge Abrasive Grain about?
Статья. Опубликована в журнале "Transactions on Electrical and Electronic Materials". – 2005. – Vol. 6, No.3 – P. 128-132. Авторы: Hee-Nam Kim, Dea-Wha Soh, Sang-Jeen Hong, Byung-Woo Lee. Статья на английском языке. Название на русском языке: Магнитно-абразивной полирование внутренней поверхности трубы из стали STS с использованием композиции абразивных зерен. Аннотация к статье на английском языке: In this paper, we have investigated the characteristics of the magnetic abrasive using sludge on polishing of internal finishing of seamless stainless steel (STS304) tube applying magnetic abrasive polishing. Either white alumina (WA) or green carborundum (GC) grain was used to resin sludge at a low temperature, and the sludge of magnetic abrasive powder was synthesized and crushed into 200 meshes. Surface roughness was measured before and after polishing, and more than 40 % of improvement of surface roughness was achieved when WA grain was used under a specific condition. Even though some degree of surface roughness due to deeper scratches still exist, but the result showed a prospective magnetic abrasive polishing using sludge with WA or GC grains.
Who reads Magnetic Abrasive Polishing for Internal Face of STS Tube using Sludge Abrasive Grain?
It is typically read by self-directed learners exploring a subject in depth.
Common subject areas: history, science, philosophy, social sciences.
- Author
- Kim H.N.
- Language
- EN
- Category
- nonfiction
- Subjects
- Engineering, Mechanical Engineering & Dynamics, Stem
More by Kim H.N.
Similar books
- Polishing Processing to Internal Surface of Non-Magnetic Pipe by Magnetic Abrasive Finishing — Chen Y., Wang X., Zhang C.J.
- Magnetic Abrasive Automatic Polishing of Curved Surface — Anzai M., Yoshida T., Nakagawa T.
- Development of a Magnetic Abrasive Jet Machining System for Precision Internal Polishing of Circular Tubes — Kim J., Kang Y., Bae Y.H., Lee J.
- High-speed Internal Finishing of Capillary Tubes by Magnetic Abrasive Finishing — Kang J., George A., Yamaguchi H.
- Study of an Internal Magnetic Abrasive Finishing Using a Pole Rotation System — Shinmura T. Yamaguchi H.
- Development of an Internal Magnetic Abrasive Finishing Process for Nonferromagnetic Complex Shaped Tubes. — YAMAGUCHI, Hitomi; SHINMURA, Takeo; KOBAYASHI, Atsushi (2001)