Opening book details…
Can I read The Effect of Cold and Hot Rolling on the Microstructure and Fracture Characteristies of Titanium-to-Steel Explosion Welds on EtoBox?
The Effect of Cold and Hot Rolling on the Microstructure and Fracture Characteristies of Titanium-to-Steel Explosion Welds by Lucien Trueb; Robert Wittman is a Engineering article available to read on EtoBox.
What is The Effect of Cold and Hot Rolling on the Microstructure and Fracture Characteristies of Titanium-to-Steel Explosion Welds about?
The microstructure and fracture characteristics of titanium-to-steel explosion welds was investigated after cold rolling and hot rolling between 656 and 1034 °C. Debonding of the as-welded composite occurs at cold reductions of 30 °/o and less. Rolling at 656 °C does not produce any intermetallic compound, while rolling between 760 and 927 °C results in the formation of a 1 to 2 micron-thick layer of TiFe. A duplex layer of TiFe and presumably TiFe, is observed at rolling temperatures of 980 and 1034 °C. After rolling at 656 °C fracture can be made to occur with difficulty along a uniform, continuous strain-hardened zone at the weld interface. After rolling at 760 and 815 °C, fracture occurs by connection of cracks at discontinuous strain-hardened zones at the weld interface. Fracture is initiated by voids produced by separation of metal flow around particles of TiFe after rolling at 870 °C. In material rolled at 927 and 1034 °C, fracture proceeds through the intermetallic phases.
Who reads The Effect of Cold and Hot Rolling on the Microstructure and Fracture Characteristies of Titanium-to-Steel Explosion Welds?
It is typically read by researchers, students, and practitioners in Engineering.
- Author
- Lucien Trueb; Robert Wittman
- Publisher
- Walter de Gruyter GmbH
- Published
- 1973
- Field
- Engineering (Physical Sciences)